Asset Management Associates

Metalworking, CNC, Laser & Plastic Injection Molding

WISCONSIN OVEN ALUMINUM QUENCH FURNACE (SOLD)

Published on 10/19/20
WISCONSIN OVEN ALUMINUM QUENCH FURNACE SOLD

HORIZONTAL LOAD FURNACE WITH AIR OPERATED FRONT DOOR. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY AND STAINLESS STEEL DUCTWORK. HEAT IS SUPPLIED BY ELECTRIC INCOLOY SHEATHED HEATING ELEMENTS (144 KW) CONTROLLED BY SCR. HEATED AIR IS CIRCULATED BY 15 HP PLUG TYPE FAN (15,000 CFM). AT COMPLETION OF HEAT CYCLE FRONT DOOR OPENS, LOAD IS TRANSFERED OUT OF FURNACE AND LOWERED INTO QUENCH TANK IN 15 SECONDS OR LESS FROM THE TIME DOOR STARTS TO OPEN. ELECTRICALLY HEATED (96 KW) STAINLESS STEEL WATER QUENCH TANK (APPROX. 3,000 GALLONS), WITH TWO TIER AIR OPERATED ELEVATOR THAT ALLOWS OPERATOR TO LOAD ANOTHER BASKET WHILE A LOAD QUENCHES.. NEW 2017, DESIGNED TO HEAT 2500 LBS OF ALUMINUM AND 1500 LBS STEEL LOAD BASKET AND GRID TO 1020 F .

2017 ZEISS DURAMAX CMM (Sold)

Published on 01/16/20
2017 ZEISS DURAMAX CMM Sold

Used 2017 Zeiss Duramax Coordinate Measuring Machine (CMM). Good used condition. C99L Controller, VAST XXT (TL3) Probe, 500 mm X, Y, & Z Measuring Range. Unit was packaged back up by Zeiss and is in secured storage at riggers warehouse. FOB Sioux Falls, SD

2018 HAAS VF2SS 3 AXIS CNC VERTICAL MACHINING CENTER (Sold)

Published on 10/22/19
2018 HAAS VF2SS 3 AXIS CNC VERTICAL MACHINING CENTER Sold

BANK REPO! 2018 HAAS VF2SS 3 AXIS CNC VERTICAL MACHINING CENTER. ONLY 1762 HOURS. 24” SPINDLE NOSE TO TABLE MAX, 4.0” SPINDLE NOSE TO TABLE MIN, 12,000 RPM, 30HP MAIN MOTOR, CAT 40-TAPER SPINDLE, 36” X 14SLOTTED TABLE, 1500LB TABLE LOAD, 30-POSITION AUTOMATIC TOOL CHANGER SIDE MOUNTED, COMPLETE WITH RENISHAW OMI-2H OPTICAL RECEIVER, HAAS PROBING, HAAS HIGH SPEED CNC CONTROL WITH USB, 20-WATT HIGH INTENSIY LIGHTING, CHIP SCREW, 300PSI COOLANT, SN 1151170, 220V/3PH/60 HZ ELECTRICS. MAKE OFFER! CALL JOHN FOR DETAILS 206-280-7709

2018 HAAS VF4SS 3 AXIS CNC VERTICAL MACHINING CENTER (Sold)

Published on 10/22/19
2018 HAAS VF4SS 3 AXIS CNC VERTICAL MACHINING CENTER Sold

BANK REPO! 2018 HAAS VF4SS 3 AXIS CNC VERTICAL MACHINING CENTER. ONLY 1645 HOURS. 29.2” SPINDLE NOSE TO TABLE MAX, 4.2” SPINDLE NOSE TO TABLE MIN, 12,000 RPM, 30HP MAIN MOTOR, CAT 40-TAPER SPINDLE, 52” X 18SLOTTED TABLE, 1750LB TABLE LOAD, 30-POSITION AUTOMATIC TOOL CHANGER SIDE MOUNTED, COMPLETE WITH RENISHAW OMI-2H OPTICAL RECEIVER, HAAS PROBING, PROGRAMMABLE COOLANT NOZZLE, HAAS HIGH SPEED CNC CONTROL WITH USB, 20-WATT HIGH INTENSIY LIGHTING, CHIP SCREW, 300PSI COOLANT, SN 1153244, 440V/3PH/60 HZ ELECTRICS. MAKE OFFER! CALL JOHN FOR DETAILS 206-280-7709

2018 HAAS VF4SS 4 AXIS CNC VERTICAL MACHINING CENTER (Sold)

Published on 10/22/19
2018 HAAS VF4SS 4 AXIS CNC VERTICAL MACHINING CENTER Sold

BANK REPO! 2018 HAAS VF4SS 4 AXIS CNC VERTICAL MACHINING CENTER. ONLY 1023 HOURS. 29.2” SPINDLE NOSE TO TABLE MAX, 4.2” SPINDLE NOSE TO TABLE MIN, 12,000 RPM, 30HP MAIN MOTOR, CAT 40-TAPER SPINDLE, 52” X 18SLOTTED TABLE, 1750LB TABLE LOAD, 30-POSITION AUTOMATIC TOOL CHANGER SIDE MOUNTED, COMPLETE WITH RENISHAW OMI-2H OPTICAL RECEIVER, HAAS PROBING, HAAS 4TH AXIS ROTARY TABLE, HAAS HIGH SPEED CNC CONTROL WITH USB, PENDANT CONTROL, 20-WATT HIGH INTENSIY LIGHTING, CHIP SCREW, SN 1154335, 220V/3PH/60 HZ ELECTRICS. MAKE OFFER! CALL JOHN FOR DETAILS 206-280-7709